ArcBasicDocs
3DPhysics VehiclesArcBasic extension

VehicleSuspension

Sets how a vehicle's springs and tyres behave.

VehicleSuspension ( vehicle,stiffness#,damping#[,grip#] )

Parameters

vehicle
a vehicle with wheels (see AddWheel)
stiffness#
how stiff each wheel's spring is. 0 or less works it out from the mass
damping#
how quickly bouncing dies away. Less than 0 works it out from the mass and stiffness
grip# (optional)
how well the tyres grip: 1 (the default) is normal, less slides like ice, more grips like a racing car

Description

Sets how a vehicle's springs and tyres behave. Soft springs give a floaty ride that leans in corners; stiff ones give a hard, flat ride. With too little damping the vehicle keeps bouncing after a bump.

Example

VehicleSuspension.absOpen in editor
; Physics vehicles example (an ArcBasic extension); A car on four wheels with springs, steering, an engine and brakes.; Up/Down: drive   Left/Right: steer   Space: brake   R: put it back on its wheelsGraphics3D 640,480SetBuffer BackBuffer()light=CreateLight()RotateEntity light,50,30,0ground=CreatePlane()EntityColor ground,70,90,70EntityPhysics ground,1; bumps and a ramp to drive overFor i=0 To 9	b=CreateCylinder(12)	ScaleEntity b,.15,4,.15	RotateEntity b,0,0,90	PositionEntity b,0,0,15+i*1.5	EntityColor b,140,140,140	EntityPhysics b,1Nextramp=CreateCube()ScaleEntity ramp,3,.2,5PositionEntity ramp,-12,.9,10RotateEntity ramp,-12,0,0EntityColor ramp,170,140,100EntityPhysics ramp,1; cones to knock overFor i=0 To 7	c=CreateCone(12)	ScaleEntity c,.3,.5,.3	PositionEntity c,10,.5,i*3	EntityColor c,255,130,40	EntityPhysics c,2,.2Next; the car: a dynamic body with four wheel entities (they need no physics of their own)car=CreateCube()ScaleEntity car,1,.3,2PositionEntity car,0,1.2,0EntityColor car,220,50,60EntityPhysics car,2,10cab=CreateCube(car)ScaleEntity cab,.8,.8,.5PositionEntity cab,0,1.6,-.2EntityColor cab,240,240,255For i=0 To 3	x#=-1.1 : If i Mod 2 Then x=1.1	z#=1.4 : If i>1 Then z=-1.4	w=CreateCylinder(16,True,car)	ScaleEntity w,.4,.15,.4	RotateEntity w,0,0,90	PositionEntity w,x,-.3,z	EntityColor w,40,40,40	; front wheels steer, back wheels drive; the radius is fitted to the wheel's mesh	If i<2 Then AddWheel car,w,True,False Else AddWheel car,w,False,TrueNextVehicleEngine car,120,30camera=CreateCamera()While Not KeyHit(1)	throttle#=KeyDown(200)-KeyDown(208)	steer#=KeyDown(205)-KeyDown(203)	VehicleControl car,throttle,steer,KeyDown(57)	If KeyHit(19)		PositionEntity car,EntityX(car),2,EntityZ(car)		RotateEntity car,0,EntityYaw(car),0		SetEntityVelocity car,0,0,0	EndIf	UpdateWorld	; the camera follows behind the car	PositionEntity camera,EntityX(car),EntityY(car),EntityZ(car)	RotateEntity camera,0,EntityYaw(car),0	MoveEntity camera,0,4,-10	PointEntity camera,car	RenderWorld	Text 0,0,"Up/Down: drive   Left/Right: steer   Space: brake   R: reset"	Text 0,15,"Speed: "+Int(VehicleSpeed(car))+" units a second"	touching=0	For i=1 To 4		If WheelContact(car,i) Then touching=touching+1	Next	Text 0,30,"Wheels on the ground: "+touching	FlipWendEnd

See also